Mr. Mike’s Calgary Plumbing Furnace Filter Cleaning Process
Calgary, Airdrie, Chestermere and surrounding areas don’t forget to change your furnace filters! It’s an easy task that can be taught and we can always show
Plumbing bathtub drains is one of the most painstaking tasks related to maintaining your home’s plumbing system.
Usually, a bathtub maintenance issue can only be resolved by a qualified plumber, preferably one who is skilled and experienced. Handling installation, maintenance and repair of bathtub drains is a task best suited to a careful, thorough professional plumber.
Repairing a Broken Bathroom Drain
Repairing a plumbing bathroom drain may use some or all of the follow tools: a wire coat hanger, needle-nose pliers, slip-joint pliers, a screwdriver, a putty knife or exacto knife, towels, putty or caulk, heat resistant grease, an overflow plunger, trip lever and linkage.
Plumbing your bathtub drain typically involves the following repair procedures:
Link the mechanism to the new overflow plate with the supplied pin. Put the new plunger into position and screw the overflow plate in place. Test the drain by shutting it closed and filling the tub to ensure that it holds water. Remove the plate and seal the seam with putty or caulk, leaving a space at the bottom of the plate to allow for overflow. Reattach and screw down the plate. Scrape any excess putty or caulk.
Unclogging Bathtub Drains
To remove a blockage in the plumbing bathtub drain, first try running hot water through the drain. If this fails, try using a plunger. When using a plunger, ensure that the overflow outlet is well plugged before plunging. Use a drain agent or chemical only as a last resort.
If the blockage is impossible to remove with a plunger, you will have to remove and unclog the drum trap cover located beneath the bathtub. This task can prove to be quite a challenge. Removing the drum trap is required to get at a really tough clog. Before removing the drum tap cover, grease it with high grade penetrating oil. After the oil has soaked in, you can remove the cover with a large wrench. If the wrench fails to remove the cover, use a hacksaw and cut notches on the edges of the cover. Forcibly remove the cover by using a hammer and punch or cold chisel. When the cover is removed, use a drain auger on the clogged pipes to clear the blockage.
Related Posts
Calgary, Airdrie, Chestermere and surrounding areas don’t forget to change your furnace filters! It’s an easy task that can be taught and we can always show
What’s the difference between a boiler and a furnace? If your home is heated through the circulation of hot water, then you have a boiler system.
What to do if Your Furnace Won’t Turn on? If your furnace won’t turn on, you might be in a little bit of a panic trying
If you are looking for the best Plumber in Calgary for your services and repairs, please Company with 24/7 Emergency Services
Fill out the form below and we will get back to you ASAP.
If you have an after-hours emergency, call our 24-hour emergency number at (587) 205-8273 Or email us : mike@mrmikesplumbing.ca
Having a Plumbing Emergency?
Quick Links
Quick Links
Contact Us