Plumbers CalgaryJuly 29, 2016
Water-Saving TechniquesSeptember 16, 2016
Plumber in Calgary- Bathroom showers could be intended as part of the bathtub or as a stand-alone enclosure. Waterproof materials like for instance stone, glass and tile are normally utilized in showers. Showers which are incorporated with a tub share one drain. Separate shower enclosures have an individual drain. Wastewater from showers is drained through an under-floor trap into the DWV pipes and afterward into the sewer system.
Rather than installing your showerhead yourself, it is recommended that you hire a qualified plumber for this installation. Poor water pressure and leaks can be caused by the incorrect installation of a showerhead. Showerheads come in various sizes and styles. Prior to buying a showerhead, ensure that it will suit your current plumbing setup. Various kinds could be screwed on without a lot of trouble, while others come with their own hardware and need to be connected by a professional.
- Shower Pans
The floor of the shower is known as the shower pan. It directs the water into the drainage system. Shower pans may have to be repaired or replaced overtime. If there is a problem with your shower pan, you may notice the following signs: water leaking from pan to lower floor; discoloration of the flooring; moldy or missing grout; a gap forming between tile and wall. A professional should be contracted to repair or replace the shower pan to avoid messy and expensive complications.
Common Shower Calgary Plumbing Problems
- Checking for Shower Pan Leaks
The shower pan sits below the base of the concrete or tiles of the shower. The pan is intended to prevent leakages. Shower pans however, can deteriorate in time resulting in leakages which can cause floor damage. Check for water leaks by plugging the shower drain making use of a plug and turning on the faucet until the shower floor has an inch or so of water. Mark the water line and observe it for a few minutes. If the water level drops, this is an indication that the pan needs repair or replacement.
- Unclogging Showerheads
Eventually, mineral deposits can build up and block the showerhead holes. Poorly spraying showerheads, likely must be cleaned. The mineral deposits could be dissolved by soaking the showerhead in vinegar. Wipe off the showerhead in the morning and reinstall. This would restore full water pressure. If not, the showerhead likely must be replaced.
- Keeping Shower Drain Clear
Exposed shower drains will be more prone to clogging from soap and hair. It is recommended that strainers be placed on top of the drain opening to be able to prevent clogging or obstruction. If the water in the shower is draining slowly, a clog has probably settled. Try utilizing a plunger to to unsettle the blockage. If a plunger does not solve the problem, try snaking the drain. Chemical drain cleaners should only be utilized in the event that neither snaking or plunging works at unblocking the drain.
- Temperature Fluctuations
No one likes the experience of feeling their shower water suddenly turn cold. Sudden water temperature changes during a shower can take place when other plumbing appliances are being utilized within the house. This can indicate that you should install a pressure-balancing valve on the hot and cold water lines which supply the shower faucet.